Installation Procedure - Toto YB990 Manual De Instrucciones

YB990 Bath towel holder
YC990 Hand towel holder
1. Hold the body against the wall and
mark the drill points. Open 1/4" (6mm)
in diameter, over 1-1/2" (40mm) deep
holes for the wall anchor.
2. Drill wall holes for the provided wall
anchors. Hold the front long driver to
mount the body on the wall with flat
head wall screws to fix the body. Avoid
scarring the body with the tools.
3. Install the cover from below the body.
Secure the cover with the provided hex
wrench and cover screws.
YH990 Robe Hook
1. Place the mount against the wall and
mark the drill points. Open 1/4" (6mm)
in diameter, over 1-1/2" (40mm) deep
holes for the wall anchor.
2. Drill the holes for the provided wall
anchors. Use the pan head wall screws
to attach the mount. Make sure it is
securely mounted.
3. Push the body onto the mount, using
the body screws to secure the body.

INSTALLATION PROCEDURE

Wall Screw Position
YC990
6"
(150mm) (150mm)
YB990
6"
(150mm) (150mm)
Wall
Anchor
Flat Head
Wall Screw
Front
Cover
Screw
Wall Screw Position
(20mm)
Wall Anchor
Mount
Pan Head Wall Screw
Body
Screw
Body
5
6"
6" 6"
(150mm)
Wall Hole
Cover
3/4"
Wall
Hole