Note About Pinpoint Feet; Maintenance; Using The Teac Global Site - Teac PE-505 Manual Del Usuario

Note about pinpoint feet

High-precision metal pinpoint feet are attached firmly to the bot-
tom plate of this unit.
The stands for these feet are loose, but when the unit is placed in
position, it is supported by these pinpoint feet, which will effectively
disperse vibrations.
Chassis
Foot-stand (metal)
o The included rubber pads are intended to protect the surface
where the unit is placed. Apply them to the bottoms of the
foot-stands.
Pinpoint foot (metal)
Screws that attach
foot-stand

Maintenance

Wipe dirt from the top cover and other panel surfaces using a
soft cloth that has been slightly dampened with a diluted neutral
cleanser.
Do not wipe with chemical cleaning cloths, thinner or other chemi-
cal agents. Doing so could damage the surface.
V
For your safety, disconnect the power cord from
the outlet before cleaning.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global Site:
https://teac-global.com
In the TEAC Downloads section, click the desired language to open
the Downloads website page for that language.
EN
7