Brinkmann 810-7405-S Para El Instalador página 22

810-8532-S ROTISSERIE BURNER
CAUTION: Only use specified
natural gas orifice for your grill.
Note: It is helpful to keep the screws
with the components as they
are removed for ease of
reassembly.
Step 10
Remove the two screws of panel to
gain access to the rotisserie LP valve
on back side of grill. Set aside for later
use.
Step 11
Using an adjustable wrench to hold
the gas line secure, use the open
end wrench provided to loosening the
gas line retaining nut. With the rotisserie
gas supply line detached from the
housing, use two wrenches to remove
the LP brass orifice from the gas supply
line.
Note: Bending the hose could
damage the supply line.
Step 12
Reattach gas supply line to the
rotisserie housing by securing with
the retaining nut removed in Step 11.
Note: Leave the back panel off until
the end of conversion and all
gas leak testing has been
completed.
Step 13
Re-install rotisserie cover using the
bolts that were set aside in Step 10.
21
Retaining Nut
Cover Bolts
Brass Orifice