Intended Purpose; Safety Instructions; Telephone Settings; Set The Time And Date - Topcom DESKMASTER 4100 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
1
Before Initial use
Thank you for purchasing this new desktop caller
ID telephone.
1.1

Intended Purpose

This product is intended to be connected indoor to
an analogue PSTN telephone line.
2

Safety instructions

Please read carefully through the
following information concerning safety
and proper use. Make yourself familiar
with all the functions of the equipment.
Be careful to keep these advice notes
and if necessary pass them on to a third
party.
Do not place the basic unit in a damp room or
at a distance of less than 1.5 m away from a
water source. Keep water away from the
telephone.
Do not use the telephone in environments
where there is a risk of explosions.
Dispose of the batteries and maintain the
telephone in an environment-friendly manner
3
Cleaning
Clean the telephone with a slightly damp cloth or
with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
4
Buttons / connections
(See picture on folded cover page)
1.
LCD display
2.
Up key
3.
Down key
4.
Delete key
5.
Program key
6.
Memory/VIP key
7.
Redial list key
8.
Mute key
9.
Volume key
10.
Music on hold key
11.
Ringer / In use / Missed Call LED
Topcom Deskmaster 4100
/VIP
12.
Hands-free key
13.
Redial / Pause key
Flash/LCD key R/LCD
14.
15.
Numeric keypad
16.
Direct memory keys (M1..M10)
17.
Curl cord connection (RJ9)
18.
Line connection (RJ11)
19.
Ring volume switch (Hi/Lo/Off)
5
Installation
Put batteries in the battery compartment to acti-
vate the display :
Open the battery compartment at the bottom
of the unit.
Insert 3 Alkaline AA standard batteries. (not
included)
Close the battery compartment.
Connect one end of the line cord to the
telephone line wall socket and the other end
to the backside of the telephone.
The telephone line needs to be
disconnected prior to opening the
battery door!
6

Telephone settings

6.1

Set the time and date

When you have a subscription to the caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone's clock will be set automatical-
ly. The year must always be set manually !
Press
Use
/
to select "
Press
to enter the time/date settings
Use
/
to change
Press
to move to the next item
Press
to exit the menu
Topcom Deskmaster 4100
/P
"
6(7  G$W(
3

Publicidad

Tabla de contenido
loading

Tabla de contenido