Sony SCPH-10420E Manual De Instrucciones página 7

Note on playing a DVD video in Progressive mode*
When connecting to a TV that supports progressive scan, use the SCPH-10100E
Component AV Cable (for PlayStation
If you accidentally set the progressive scan option to "On" when using a TV that
does not support progressive scan, or when using a cable other than the Component
AV Cable (for PlayStation
not be displayed.
For details on the progressive scan option, please refer to the PlayStation
instruction manual.
* The DVD player's progressive mode is only available when playing a disc recorded in
NTSC format, and viewed on a TV that supports NTSC signals.
Notes on playing a DVD video with a DTS audio track
DTS audio signal can only be output through an optical digital cable (sold
separately). Note that it cannot be output through a regular audio cable.
• Do not set the "DTS" option of "Audio Digital Out" under "Audio Setup" to "On"
when using an audio device that does not have a built-in DTS decoder. In such
cases, if you play a DTS audio track, a loud noise (or no sound) will come from
the speakers, possibly hurting your ears or damaging the speakers.
• When the "DTS " option of "Audio Digital Out" under "Audio Setup" is set to
"Off," the DVD's DTS audio output will not be played back, even if you connect
with an optical digital cable.
Notes on playing a DVD video
• Connect the console directly to the TV. If the console is connected to the TV
through a VCR, the picture quality may be reduced due to the copy protection
signal recorded on the DVD.
• When viewing DVD video on some integrated TV/VCRs, the copy protection of
the DVD may cause picture quality to be reduced.
2) (sold separately).
®
2), picture quality may be reduced, or the picture may
®
GB
2 console
®
7