TECshow HALO 7R Manual De Usuario página 13

GOBO TIME - channel 20
Timing Channel
0-255
5. CONTROL SIGNAL WIRE CONNECTION
Use the CLR-XLR controller line connect every
light's DMX input port from controller's DMX input
port, and start from the first light's DMX input port
connect to the second light's DMX input port, in this
way, until connect all of the lights, and then use
the loop accompanied connect to the last light's
signal input port the connect complet, as the follow
picture:
Note: Please remember that in the last table lamps
and lanterns signal outlet connection a loop plug.
In this loop inserted in The CANON plug between
2 and 3 feet. Connect a 120 European resistance,
connect this loop plug can avoid DMX512 signal re-
flection phenomenon in the transmission process
of signal.
This lamp use 3 core XLR plug (plug seat). If use 3
core XLR plugs (plug seat), you must use a conver-
sion line (5 core to 3 core), as shown:
Channel function
Gobo time Static Gobo
Remark
255 SLOW SPEED
...... ......
0 FAST SPEED
English version
P. 13
| Tecshow Halo R7