TECshow HALO 7R Manual De Usuario página 3

2. SAFETY WARNING INFORMATION
Before the first time to use it, please check whether
the damage in transit, if happen damages in transit,
please do not use this lamp, and please asap con-
tact distributors or manufacturers.
Please don't install the lamp in the ordinary com-
bustible material on the surface. Lamp should be
installed in the well ventilated place, and the dis-
tance of the wall to keep it over 10 cm, at the same
time, please check the fan hole was clear.
Do not use lamp direct project in flammable
objects, lamp and the radiation of the distance
between the objects please keep it over 12 m.
Do not use direct lamp project light source, to avoid
damage the eyes.
Before installation, please make sure your use pow-
er supply voltage and marked voltage.
Note: Before any install,maintain and clean lamp,
please confirm cut off the power supply.
P. 3
| Tecshow Halo R7
English version