Accessory Tool Cleaning (Option) - Nobles ReadySpace Strive 9000503 Manual Del Operador

OPERATION

ACCESSORY TOOL CLEANING (OPTION)

Optional accessory tools allow you to clean upholstery
and carpeted areas that the machine is unable to reach,
such as alcoves, stairs, corners and small rooms.
For a complete list of accessory tools see the
OPTIONS section in this manual.
ATTENTION: Before using accessory tools the
extractor vacuum shoe must be installed on the
machine.
Extractor
Vacuum Shoe
Connecting Accessory Tool to Machine:
1. Park the machine on a level surface and turn the
key to the off position.
2. Connect the accessory tool's solution hose to the
coupler located at the rear of the machine
(Figure 11).
FIG. 11
3. Disconnect the lower vacuum hose from the
machine and replace it with the accessory tool's
vacuum hose (Figure 12).
FIG. 12
4. Attach the accessory tool to the hoses.
14
Home Find... Go To..
Operating Accessory Tools:
1. Turn the key to the on ( I ) position.
2. Lower the scrub head to activate the vacuum
suction (Figure 13).
FIG. 13
3. Place the accessory tool on the area to be
cleaned. Squeeze the trigger on the accessory
tool and slowly pull the tool backwards while
applying downward pressure (Figure 14). Release
the trigger 6 inches from end of stroke. When
returning to the next stroke, push the tool forward
over the same path with trigger released. Continue
this pull and push method with a 50--100mm
(2--4 inch) overlap.
NOTE: When cleaning upholstery, always follow the
cleaning instructions sewn in the furniture by the
manufacturer.
WARNING: Fire Or Explosion Hazard. Do Not
Pick Up Flammable Materials Or Reactive Metals.
FIG. 14
4. After cleaning, relieve the water pressure from the
accessory tool before disconnecting the solution
hose. Squeeze trigger for five seconds after
turning the key off.
Nobles Strivet (09- -04)