Audio Setup - Denon DBP-4010UDCI Manual Del Usuario

ENGLISH

Audio Setup

Set the speaker or audio to be output.
Setting related to each channel setting and other audio in the case of outputting analog
audio signals decoded by the DBP-4010UDCI.
Setting items
7.1ch Audio Out
Makes·the· audio· setting·for·
Set the speaker configuration, channel level and distance for multi-
output·of·analog·7.1-channel·
channel·playback.
audio· to· a· multi-channel·
amplifier.
NOTE
Outputs·multi-channel·downmixed·audio·from·the·front·speaker·output·
terminals· (FL/FR)· of· the· 7.1-channel· audio· output· terminals.· Make· this·
You· cannot· select· "None"·
setting when outputting to a TV and 2-channel amplifier.
or· "NO"· for· "HDMI· Setup"·
–· Audio· Setup"· –· "Multi· NOTE
LPCM· BM· On"· –· "Speaker·
The· 7.1-channel· audio· output· terminals· output· only· FL/FR· when· you·
Configuration" (vpage·23,·
make·this·setting.
24)·on·the·GUI·menu.
n·Speaker Configuration : Set the speaker configuration.
GFrontH·:·Set·the·front·speaker·size.
• Large :· Use· of· a· large· speaker· that· can· adequately· play· back· low·
frequencies.
• Small :·Use·of·a·small·speaker·that·has·inadequate·playback·capacity·
for·low·frequencies.
GCenterH :·Set·the·presence·and·size·of·the·center·speaker.·
Large :· Use· of· a· large· speaker· that· can· adequately· play· back· low·
•
frequencies.
• Small :·Use·of·a·small·speaker·that·has·inadequate·playback·capacity·
for·low·frequencies.
None :·Select·when·a·center·speaker·is·not·connected.
•
GSubwooferH :·Set·the·presence·of·a·subwoofer.
• Yes :·Use·a·subwoofer.
• No :·Select·when·a·subwooofer·is·not·connected.
GSurroundH :·Set·the·presence·and·size·of·the·Surround·speakers.
Large :· Use· of· a· large· speaker· that· can· adequately· play· back· low·
•
frequencies.
• Small :·Use·of·a·small·speaker·that·has·inadequate·playback·capacity·
for·low·frequencies.
None :·Select·when·the·surround·speakers·are·not·connected.
•
Remote control operation
 buttons
Setting contents
Multi Channel
2 Channel
: Displaying·the·menu
·Cancel·the·menu
Setting items
7.1ch Audio Out
GSurr. BackH· :· Set· the· presence,· size· and· number· of· surround· back·
speakers.
•
•
GCrossover Freq.H· :· Set· the· upper· limit· of· the· low· frequency· signals·
output·from·the·subwoofer.
•
•
: Moves·the·cursor·
:Decision·the·setting
·(Up/Down/Left/Right)
Default settings are underlined.
Setting contents
Size·:·Set·the·surround·back·speaker·size.
Large· :· Use· of· a· large· speaker· that· can· adequately· play· back· low·
frequencies.
Small·:·Use·of·a·small·speaker·that·has·inadequate·playback·capacity·
for·low·frequencies.
None·:·Select·when·the·surround·back·speakers·are·not·connected.
Number·:·Set·the·number·of·surround·back·speakers.
1 spkr :·Use·only·one·surround·back·speaker.·Surround·back·audio·is·
output·from·the·surround·back·L·terminal.
2 spkrs·:·Use·two·surround·back·speakers.
· 4 0Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
:· Outputs· at· below· set· frequency,· each· speaker's· bass· signal·
output·from·the·subwoofer.·Set·this·according·to·the·low·frequency·
reproduction·capabilities·of·the·speakers·you·are·using.
· A dvanced· :· Set· the· low· frequency· signals· to· be· output· from· the·
signals·of·the·respective·speakers·to·the·subwoofer.
Front, Center, Surround, Surr. Back
40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
LFE / LFE+Main
80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
When,·on·the·GUI·menu,·"Audio·Setup"·–·"7.1ch·Audio·Out"–·"Multi·
Channel" – "Speaker Configuration" – "Subwoofer" is set to "Yes"
(vpage·25),·you·can·select·"LFE"·or·"LFE+Main".·
:Return·to·previous·menu
See overleaf