Technical Data; Function Of The Unit; Overview (A); Operating (B) - Rothenberger ROSPIMATIC Instrucciones De Uso

2

Technical Data

Nominal consumption ................................................
Performance ..............................................................
Speed ........................................................................
Spiral rod diameter ....................................................
Max. spiral rod diameter ............................................
Weight .......................................................................
Protection class .............................................................
Protection type ...........................................................
Noise pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 60745-1:2010.
Vibration total value .............................................................
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
3

Function of the Unit

3.1 Overview
1 Spiral rod holder
2 Drive
3 Control handle
3.2 Operating
 Plug mains plug into power supply.
A heavy starting torque is produced when the machine starts running! Exer-
cise care when starting up the machine, i.e. select a low speed and increase if
required!
Inserting the spiral into the pipe:
 Tighten the pressure sensor (4) (+) and set the control handle (3) to forward motion (push
handle in the direction of the spiral container (1). The feeder is regulated continuously (for-
wards, neutral and backwards) by means of the control handle (3).
Only tighten the pressure sensor (4) sufficiently to ensure that the spiral can no longer be
pulled by hand from the spiral container.
There must be a distance of approx. 20 cm between the cleaning equipment and the
pipe opening.
230 V
630 W
0 – 950 min
Ø 8 mm
7,5 m
approx. 5 kg
II /
IP 20
) .......................................... 83 dB (A) ¦ K
pA
) ............................................ 94 dB (A) ¦ K
WA
< 2,5 m/s
ENGLISH
-1
clockwise
3 dB (A)
pA
3 dB (A)
WA
2 2
¦ K= 1,5m/s
4 Pressure sensor
5 Spiral
(A)
(B)
11