Technical Data - Profi Care PC-HT 3044 Instrucciones De Servicio

Switching Off
If you would like to interrupt operation or switch the hair-
dryer (1), slide the power switch (5) into the 0 position, and
remove the powerplug (13) from the power socket.
WARNING:
• Always pull out the power plug from the mains socket before
cleaning the appliance and wait until the appliance has com-
pletely cooled down.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Doing so might result in an elec-
tric shock or cause a fire to start.
CAUTION:
• Do not use any wire brush or other abrasive objects in
order to avoid permanent damage to the appliance.
• Do not use any acidic or abrasive detergents in order
to avoid permanent damage to the appliance.
Housing
Clean the housing after use with a slightly damp cloth once
the appliance has completely cooled down.
Hanging loop
• The appliance can be hung by using the designated
hanging loop (7) for temporary storing.
• Please make sure the hairdryer (1) is safely turned off and
the power switch (5) is put into the 0 position to avoid
any risk of injury or potential damage to the hairdryer (1)
while moving around the appliance while being hung.
• Ensure that the power cord is not obstructing the move-
ment around the hairdryer (1) while hanging to avoid
any risk of injury or potential damage to the appliance.
Cleaning
Model: ........................................................................PC-HT 3044
Power supply: ......................................220 - 240 V~, 50/60 Hz
Power consumption: ..........................................1600 - 1800 W
Protection class: ............................................................................II
Net weight: ..........................................................approx. 0.9 kg
Dimensions: ..............................................240 x 260 x 100 mm
Colour: ...................................................................................White
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest safety regulations.

Technical Data

33