Names And Functions Of Parts; Operation Panel - Pioneer DVJ-1000 Manual De Instrucciones

Before Operating (Names and Functions of Parts)

Names and Functions of Parts

Operation panel

Buttons and controls with the
Buttons and controls with the
1 2
46 4748
POWER
OFF ON
45
TIME AUTO
MODE CUE
TEXT MODE
44
DVD TITLE
ANGLE SUBTITLE
MP3 FOLDER
43
REALTIME CUE
HOT CUE
IN
IN ADJUST OUT ADJUST
42
BACK & FORTH
REC MODE
41
DIRECTION
FWD
40
REV
39
PREVIOUS NEXT
38
REV FWD
37
36
CUE
35
PLAY/PAUSE
REV
34
33
32
31
1. POWER OFF (—)/ON (_) switch
Located on the rear panel.
2. Loop in/realtime cue/loop in point adjust button/indica-
tor (IN/REALTIME CUE/IN ADJUST)
Real time cue P.36
Loop-in point input P.40
Loop-in point adjust P.40
3. Loop out/loop out point adjust button/indicator
(OUT/OUT ADJUST)
Loop-out point input P.40
Loop-out point adjust P.40
4. BACK & FORTH button
Use to switch between normal loop mode and back & forth loop mode.
5. Loop mode indicator
Lights during back & forth loop mode.
6. RELOOP/EXIT button/indicator
8
En <DRB1416>
mark are disabled when the NORMAL/DJ switch is set to NORMAL.
mark are disabled when the NORMAL/DJ switch is set to DJ.
5 3 4 6 7 8 9 10
49
50 51 52
DVJ-1000
AUDIO
DISPLAY DELETE MEMORY
CUE / LOOP
RELOOP/ 4-BEAT
OUT
EXIT CALL
ONE-TRACK
LOOP
JOG ADJUST
FWD
30 29 28 27
P.41
P.41
P.40
11
53 54
12
STOP
13
UNLOCK LOCK
EJECT
14
MENU T.MENU RETURN SETUP
55
56
TOUCH/BRAKE
ENTER
15
RELEASE/START
LIGHT
16
HEAVY
17
HYPERJOG MODE
18
19
JOG MODE
VINYL
20
WIDE
TEMPO
21
22
MASTER TEMPO
23
TEMPO
RESET
24
TEMPO
26 25
the eject/stop mode select switch is set to the LOCK position, the
disc will not be ejected unless the unit is set to pause before press-
ing the EJECT (0) button ( P.31).
15. TOUCH/BRAKE response dial
Adjusts the disc deceleration speed (time to playback stop) when
the jog dial's top surface is touched with jog mode set to VINYL ON.
Rotate the dial counterclockwise to stop playback quickly, and rotate
dial clockwise to cause slower deceleration.
16. RELEASE/START response dial
Adjusts the disc acceleration speed (playback startup time) when
the jog dial's top surface is released with jog mode set to VINYL ON.
Rotate the dial counterclockwise to restart playback quickly, and ro-
tate dial clockwise to cause slower acceleration.
17. JOG ADJUST dial
Use to adjust the felt resistance (light/heavy) of the jog dial when it is
rotated.
18. HYPERJOG MODE button/indicator
When hyper jog mode is set to ON with jog mode set to VINYL ON,
turning the jog dial causes the rate of change of image and sound to
increase to 4x the rate of changed normally produced (when the hyper
jog mode is OFF).
7. 4-BEAT/ONE-TRACK button
• 4-Beat Loop
When this button is pressed, loop play will be-
gin with that point as the loop-in point, and the
loop-out automatically point set 4 beats later.
• One-Track Loop
When this button is held depressed for 1 sec-
ond or more, the chapter loop or track loop play
will begin.
8. CUE/LOOP CALL button
Press to turn cue point navigation mode ON/
OFF.
9. Cursor button ( / / / )
This button is used for cue point navigation;
during MP3 playback, functions for performing
selections with MP3 navigator, and for making
various DVD settings.
10. ENTER button
This button is used for cue point navigation;
during MP3 playback, functions for performing
selections with MP3 navigator, and for making
various DVD settings.
11. NORMAL/DJ switch
Located on the rear panel.
12. STOP button
Stops disc playback. When the eject/stop mode
select switch is set to LOCK, playback will not
stop unless the PAUSE mode is set first.
13. Eject/stop mode select switch
(UNLOCK/LOCK)
UNLOCK: If the EJECT (0) button is pressed
during playback, the disc stops and is ejected.
If the STOP button is pressed during playback,
the disc playback stops.
LOCK: If the EJECT (0) button is pressed dur-
ing playback, the disc will not be ejected. To
eject the disc, set the unit to pause, then press
the EJECT (0) button. Likewise, playback will
not stop if the STOP button is pressed during
playback; to stop disc playback, set the unit to
pause, then press the STOP button.
14. EJECT (0) button
When this button is pressed, disc rotation stops
and the disc is ejected from the loading slot. If
P.41
P.44
P.14