Setup; Unpacking; Compressor Initial Setup Checklist - Invacare HomeFill II Oxygen System IOH200AW Manual Del Usuario

Ocultar thumbs Ver también para HomeFill II Oxygen System IOH200AW:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71

3 Setup

3.1 Unpacking

1195663-A
1.
Check for any obvious damage to the carton or its contents. If
damage is evident, notify the carrier, or your local dealer.
2.
Remove all loose packing from the carton.
3.
Carefully remove all of the components from the carton.
Unless the compressor is to be used IMMEDIATELY, leave
the compressor in its packaging for storage until use of the
compressor is required.

3.2 Compressor Initial Setup Checklist

Dealers ONLY — Refer to Dealer Information in the Safety
section of this manual before performing this procedure.
Users ONLY — Contact your Invacare dealer or Invacare
for assistance with the setup procedure and to report
unexpected operation or events.
Before operating the HomeFill Compressor for the first time,
complete the following checklist:
Choose a location for the compressor.
Transport the compressor to the desired location.
Connect the power cord to the compressor.
Connect the compressor to the concentrator.
Setup
13

Publicidad

Tabla de contenido
loading

Tabla de contenido