Hofmann monty 3300racing AT Manual De Operador página 26

E
F
A
B
a
26
monty 3300 RACING AT
4.1-1
c
b
4.1-2
4.1-3
C.
Press down and hold, WITH
from the right: the turntable turns clockwise.
Lift the pedal and the turntable turns counter-clockwise.
H
D.
Open the bead breaker arm. Press down and hold, WITH
LEFT FOOT, the
this you operate the bead breaker blade and the arm
will move towards the machine. Release the pedal: the
bead breaker blade will retract.
G
DANGER OF LEG TRAPPING
E.
The push button on the handle allows to release the
arms and drive the mount/demount tool in the correct
position.
D
1.
To unlock and let the slide with the tool go up: push the
button firmly with the forefinger, in the direction of the
arrow (A, Fig. 4.1-2).
2.
To unlock and let the slide with the tool go down: push
C
the button with the thumb in the direction of the arrow,
until the resistance increases (B, Fig. 4.1-2).
3.
To lock: push the button firmly with the thumb (C, Fig.
4.1-2).
DANGER OF HAND CRUSHING
F.
Press bead seater/inflator pedal on left side of the
machine down (1, Fig. 4.1-3): air will come from inflation
hose end (2, Fig. 4.1-3).
Only for Tubeless wheel models:
F1. Press bead seater/inflator pedal (1, Fig. 4.1-3) on
left side of the machine half way down: air will come
from inflation hose end only (2, Fig. 4.1-3).
F2. Press bead-seater pedal
to get air blast from the inflator jets. Air simultaneously
comes out of inflator hose
pressure air jet exits the Tubeless Beading device.
Note: Air simultaneously continues to exit the hose
2
connected to the tire.
Operator's Manual
RIGHT FOOT, the first pedal
second pedal from the right: by doing
(1, Fig.4.1-3)
(2, Fig.4.1-3); a high
USA - CANADA
down swiftly