CMT ORANGE TOOLS CMT900 Manual De Instrucciones página 21

Mecanismo perforador para juntas con perno, sostén para estantes y bisagras
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Work safety
1 - Always switch off and unplug the drill when changing the drill bit or setting drilling depth.
2 - Do not touch rotating parts while drilling.
3 - Use ear protection.
4 - Always wear a dust mask or a ventilator.
5 - Do not wear loose clothing. Make certain loose sleeves have been rolled up or held closed and
do not wear a tie.
6 - Before switching the drill on, make certain that the drill bit is well tightened and the stop ring
well secured.
7 - Prevent the drill from unexpectedly switching on: make certain the drill switch is not locked at
"on" before plugging in.
8 - Wait until the drill has stopped completely before performing any setting operation or tool
change.
CMT900 – Spare parts list
Pos. #
Description
1
Drilling template
2
Ø6/10mm fixing pin with point
3
Ø3/18mm centering pin
4
Ø5/18mm centering pin
5
Ø8/18mm centering pin
CMT400-1 and CMT400-2 - Spare parts list
Pos. #
Description
1
CMT400-1 centering bush w. bearings
CMT400-2 centering bush w. bearings
2
CMT400-1 chuck shaft
CMT400-2 chuck shaft
3
Ø9/17x6mm stop ring
4
Ø10/12x65mm spring
5-6
M4x4 setting grub hex screws
7
2mm hex key
8
Ø5mm centering pin for CMT400-2
9
Ø7mm centering pin for CMT400-2
www.cmtorangetools.com
(see page 4)
(see page 6)
WORK SAFETY AND SPARE PARTS LIST
Pieces
1
4
2
2
2
Pieces
1
1
1
1
1
1
2
1
1
1
AA
Code
CMT900-01
CMT900-04
CMT900-13
CMT900-15
CMT900-18
Code
CMT400-11
CMT400-21
CMT400-12
CMT400-22
CMT400-13
CMT400-14
990.016.00
991.060.00
CMT900-15
CMT900-17
21

Publicidad

Tabla de contenido
loading

Tabla de contenido