3.3.3 Performing A Calibration Milling - Amann Girrbach ceramill motion 2 Instrucciones De Uso

C A L I B R A T I N G T H E B L A N K H O L D E R

3.3.3 Performing a calibration milling

▷ Check the connection mandrel of the Ceramill
E N
blank holder for rotation milling and clean if
required.
▷ Insert tooling into tool holder.
The tool of location 1 is already in the col-
let.
▷ Insert the tool holder via the connection man-
drel to the stop into the locating bore of the
machine.
Fig. 11
Fig. 12
24
> 0
▷ Tighten the fastening screw with the torque
wrench until the torque wrench clicks once.
▷ Mount the transparent splash guard to the
extraction opening and lock it in place with the
lever.
▷ Briefly press the flashing operation button [A].
The machine advances to the home position.
▷ In the Ceramill Motion software, click on the
Program successfully finished
▷ Click on the
▷ Open the
Several program files are listed.
0
button.
Open program File(s)
Test Programs
tab.
button.