Spare Parts; Blank Holder - Amann Girrbach ceramill motion 2 Instrucciones De Uso

S P A R E P A R T S
NOTE:
E N
Incorrect assembly!
Due to the varying diameters of blank screw and
blank nut, the Ceramill Ti form blank can only be
mounted in one position.
▷ Take mounting direction into account!
▷ Mounting the Ceramill Ti form blank onto the
mounting pin [3].
Fig. 19
NOTE:
Insufficient milling results!
▷ Tighten blank screw [2] firmly in order to pre-
vent the Ceramill Ti form blank from becoming
loose during processing.
▷ Firmly tighten blank screw [2] with the size 2.5
Allen key.
In the process, the blank is automatically
aligned in the exact position on the Ceramill
blank holder for rotational milling.
30
3.
1.
5

Spare parts

Art. No.
179279
760301
179288
Tab. 3
2.
Spare part
Calibration sleeve
Ceramill TEST 71 L
Blank screw and blank nut