Machine Components - HSM 412.2 Instrucciones De Servicio

HSM 412.2

3 Machine components

3
12
1
10
11
Only US-version:
Screw the document shredder to the wall tightly
for better stability. The fastening kit supplied is
only suitable for fi tting to a stone or concrete wall.
• Screw the brackets in (short side to the docu-
ment shredder) on the left and right, on the
back of the machine. The holes have already
been made on the back.
• Place the document shredder in the intended
location and make a mark for the holes on
the wall.
• Drill the holes for the plugs, insert the plugs
and then screw in the document shredder
tightly with the screws supplied.
10
2
7
4
5
6
8
9
1 Safety instructions
2 Funnel fl ap
3 Cover
4 Membrane keyboard
5 Mains switch
6 Name plate
7 Pusher lever
8 Bottom frame
9 Roller
10 Guide roller
11 Door
12 Paper feed opening
Safety element / splinter protection
Membrane keyboard
ON pushbutton
Shredder is switched on.
Cutting system runs in feed
direction.
Stop pushbutton
Cutting system stops.
Shredder remains in standby
function.
Reversing pushbutton
Cutting system runs in reverse
direction.
Ready for operation
green LED
Cut material bag full
red LED
Paper jam – electric motor
overloaded
red LED
Front door opened
red LED
0802