Unpacking; Packaging Material - myaudioart MA3 Manual De Instrucciones

Unpacking

ATTENTION
Remove the system from the packaging and carefully remove all protective foils and
other packaging material.
The system is delivered pre-assembled. In separate packages, you will find the screws
and anchors, mains cable, remote control, assembly tool for the fabric covering and
four synthetic pads. Keep the assembly tool together with this instruction manual.
Immediately after unpacking, check whether the system and all other parts are
complete and undamaged (see Scope of supply, page 34).
DANGER

Packaging material

As a manufacturer, we are aware of our responsibility towards the environment. This is
why all the packaging material is recyclable. Please support our efforts by re-using the
packaging or by sorting and disposal according to regulations. In Germany, packaging
material can be returned to your local dealer.
User Manual
Risk of damage!
Do not use a knife or other sharp-edged objects to open
the packaging.
Risk of fatal injury from electrical current!
Do not mount and connect the system to a power
supply if there is any visible damage, e.g. on the mains
cable. Have the system checked by an authorized
specialist.
35