Functions Of The Remote Control - myaudioart MA3 Manual De Instrucciones

Remote Control
You can control most of the system's functions using the remote. The remote control
uses an infrared transmitter. That means you have to point the remote to the system
when pressing one of its buttons. The line of sight between the remote control and
the system must be unobstructed.
The remote is delivered with a battery inserted, but protected with a foil to prevent
premature discharging of the battery. Replacing the battery is described on page 49.
– Before using the remote for the first time, remove the foil from its battery
compartment.
– Step in front of the system, point the remote towards it and press any button.
The LED POWER on the system will flash up briefly to confirm signal reception.

Functions of the remote control

Use of the functions is explained in the following sections of the instruction manual
(see page references).
42
Volume off / decrease / increase
see page 44
Bluetooth
®
see page 43
Jack connection INPUT
see page 44
no function
Bluetooth pairing
®
see page 43
Sound settings 1 / 2 / 3
see page 44
Standby mode
User Manual