myaudioart MA3 Manual De Instrucciones página 37

Preparation
Depending on the visual motif of the fabric covering, you can mount the system in
landscape or in portrait orientation. When operating the system in portrait orientation,
the internal DIP switches must be reconfigured (see page 45).
You can connect the mains cable at the outside of the frame. Make sure that the po-
wer socket is easily accessible from the installation site without the mains cable being
taut. Use only the provided mains cable or a mains cable from our accessories range.
Do not lengthen the mains cable.
You can place the four provided synthetic pads on the rear of the system. They will
protect your wall or reduce the transmission of vibrations if required.
– If required, place the synthetic pads (1) on the rear of the frame.
– Connect the IEC plug of the mains cable to the socket on the rear of the system
and the safety plug to the power socket.
37
User Manual