Operation; Switching On / Off - myaudioart MA3 Manual De Instrucciones

Operation

Control elements, connections and displays
All control elements and displays are integrated into the side of the frame. The remote
control is described on page 42.

Switching on / off

After connecting the system to the power supply, you can switch it on and off at any
time. After switching it on, various LED lights start to flash or light up. You can also
operate your MA 3 via your smart phone / tablet; it switches on automatically when
activated via Bluetooth
LEDs
The system is equipped with several LEDs These LEDs are tricolored (green, orange,
red) and indicate different functions and system statuses. You can find an overview of
all LEDs and their meaning on page 52.
User Manual
BLUETOOTH
SOURCE
VOLUME +
VOLUME -
IN. SENS.
INPUT
POWER
LINK
12 V DC
220 V AC
.
®
LED: Status of the Bluetooth
Button: Select audio source
Button: Increase volume
Button: Lower volume
Audio output level, adjust input sensitivity
btw. 0.2 V and 2 V
3.5 mm jack connector (stereo):
Connection for audio sources
Button: Switch on system or switch to
standby mode LED: System status
Connection to a second MA 3 or for an
external subwoofer
Connection of a 12 V power source via
a 2.5 mm barrel connector
IEC connector: Connection of the
mains plug
connection
®
41