Sound Setup - myaudioart MA3 Manual De Instrucciones

Volume
You can adjust the volume in increments. In the lowest setting the speakers are muted.
We recommend that you protect your ears and avoid high volumes over a long period
of time.
– Press one of the buttons for the volume on the remote control to adjust the volume.
– Press the VOLUME + button on the system to increase the volume.
– Press the VOLUME - button on the system to lower the volume.

Sound setup

You can choose between three different sound settings. These settings are fixed and
designed for different room types. Try and find out which setup best matches your
preferences.
– Press one of the buttons for the sound setup on the remote control
(see page 42).
– Sound setup 1, basic setting
– Sound setup 2, for bright, acoustically hard rooms
– Sound setup 3, for muffled, strongly sound-absorbent rooms
Connection via audio cable
As an alternative to the radio links, you can also connect playback devices or smart
phones to the system with a suitable audio cable.
Playback devices have varying audio output levels. Therefore, you can adjust the input
sensitivity for the stereo jack INPUT between (see page 46).
– Plug the 3.5 mm stereo jack of the playback device's audio cable into the stereo
plug INPUT.
– Press the input button on the remote control or press the SOURCE button on the
system to change between Bluetooth
– Press play on your playback device.
44
and jack connector.
®
User Manual