Shock Absorber; Adjusting The Rebound Damper; Adjusting The Hydraulic Compression Damper (High And Low Speeds) - Beta Motorcycles RR 350 EFI Manual Del Usuario

3
C
D
EN

SHOCK ABSORBER

ADJUSTING THE REBOUND
DAMPER
Turn screw A to adjust the hydraulic re-
bound damper.
A
Turning the screw anticlockwise (out) de-
creases the damping effect.
For standard setting, refer to page 11.
ADJUSTING THE HYDRAULIC
COMPRESSION DAMPER (HIGH
AND LOW SPEEDS)
Adjustment for low compression speed:
•Using a screwdriver, loosen screw C
by turning it clockwise to increase the
hydraulic compression damper.
For standard setting, refer to page 11.
Adjustment for high compression speed:
•Turn knob D anticlockwise to decrease the
hydraulic compression damper.
For standard setting, refer to page 11.
WARNING:
Starting from the standard position, turn
the knob anticlockwise (with a closing ac-
tion), the center screw will have an integral
movement, then will rotate with the knob.
For standard setting, refer to page 11.
40