Declaration Of Conformity - Bosch GSH 5 E PROFESSIONAL Instrucciones De Servicio

Stand-by-indicator 8 (green)
With the mains plug inserted and mains voltage
available, the stand-by-indicator 8 must light up.
If the machine can not be switched on despite the
lit stand-by-indicator, it must be sent to an author-
ized customer service centre for Bosch power
tools.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an authorized after-sales
service agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Direc-
tive 2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power
tools that are no longer suitable for use must be
separately collected and sent for recovery in an
environmental-friendly manner.
14 • 1 619 929 E43 • TMS • 15.02.06
To be fitted
by qualified
professional only
English - 4
Service and Customer Assistance
Exploded views and information on spare
parts can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
............................
Advice line
....................
Fax
.............................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Service
...................................
Fax
....................................................
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
.............................................
Fax
.............................................
www.bosch.com.au

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 60 745
according to the provisions of the directives
89/336/EEC, 98/37/EC, 2000/14/EC.
2000/14/EC: The guaranteed sound power
level L is lower than 105 dB (A). Conformity
WA
assessment procedure according to Annex VI.
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Leinfelden, 01.02.2006.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
Subject to change without notice
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 3 00 30 70 44
+61 (0)1 / 3 00 30 70 45
Dr. Eckerhard Strötgen
Head of Product
Certification