Memorising The Results; Recalling Stored Results - Chauvin Arnoux C.A 6121 Manual De Instrucciones

5.2.MEMORISING THE RESULTS

Any displayed result can be saved in one of 999 memory locations. The associated results as well as the test parameters are saved
at the same time as the main results and can be recalled or printed out later.
Each result is allocated a memory number (No.) and a machine number (MACH) e.g.:
The machine number can be set between 001 and 255 and the memory numbers corresponding to each machine, between 001
and 999, until the total memory capacity is full.
MACH : 001
→
How to save the displayed results ?
Key used :
, ,
Press before validating/ saving (MEM) allows the user to exit without memorising the result.
NOTES :
A displayed result can only be saved once (in order to avoid the risk of storing twice).
Memory save locations already occupied can be erased by saving a new result at this location. The occupied locations are
marked with the letters OC and the free locations with the letters FR, next to the memory number.
No:003 OC
Rapid scrolling of the memory and mchine numbers is done by continuous press on the
5.3.

RECALLING STORED RESULTS

To check a result stored in the memory, the stored result recall function can be used as follows:
Key used :
,
or EXIT
Fig.27. Presentation of memory organisation
Opens the menu of Memory options :
Opens the menu for selection of the memory number and
the machine number :
Enter the memory and machine numbers and validate/save by pressing the MEM ⇒ ⇒ ⇒ ⇒ ⇒ . The result
is saved and the main menu is displayed again.
MACH:162
Opens the menu of Memory options :
The highest save location corresponding to the last machine number used is displayed, as well as the
following menu :
Press the No ò key to consult the results saved under the displayed machine number.
Then press the MACH ò key if you want to consult the results corresponding to other machines.
A long press allows you to scroll through the memory and machine numbers.
The main menu is displayed again.
MACH : 002
→
.
40
No:025 MACH:003
MACH : 255
→
.
and
.
keys.