Using The Timer/S - Siemens xTronic HG2415UC Manual De Uso Y Cuidado

Setting the Timer/s
1. Touch TIME and TIMER 1 will be displayed.
0: 00 0: 00 0: 00 0: 00 0: 00
2. Turn knob to select TIMER 1 or 2, then push TIME.
SET TIMER 1 (2) appears in display. Minutes flash.
1: 00 : 00 : 00 : 00
: 00
HR:MIN
TIMER
3. Turn knob to set minutes.
If setting only minutes, press START. Otherwise, continue
to step 4.
4. Touch TIME again and the hours will flash.
2: 2: 2: 2: 2: 02
PM
HR:MIN
TIMER
5. Turn knob to set hours.
6. Touch TIME again.The TIMER is now set.
If TIME or START is not touched, display will beep
and timer will flash.
Changing the Timer/s
1. Touch Time. TIMER 1 will appear in display. Select
either TIMER 1 or 2.
: 00 : 00
0: 00 : 00 : 00
AM
2. Push TIME. RESET TIMER 1 (2) appears in the
display. Minute digits flash.
3. Turn knob to change minutes.
4. Touch TIME again and hour digits will flash.
5. Turn knob to change hours.
6. Touch TIME and new time is set.

Using the Timer/s

TIMER 1 TIMER 1 TIMER 1 TIMER 1 TIMER 1
SET TIMER 2 SET TIMER 2 SET TIMER 2 SET TIMER 2 SET TIMER 2
SET TIMER 2 SET TIMER 2 SET TIMER 2
SET TIMER 2 SET TIMER 2
TIMER 1 TIMER 1
TIMER 1 TIMER 1 TIMER 1
Clearing the Timer/s
1. Touch TIME once. TIMER 1 flashes.
2. Turn knob to select CLEAR TIMER 1(2).
3. Touch TIME.
4. If TIME pad is not touched, range will beep and
display will continue flashing.
0: 00 0: 00 0: 00 0: 00 0: 00
When the specified time has elapsed, the control beeps.
TIMER 1 (2) END flashes in the display.
1. Touch TIME to return to main screen.
Turn the knob to display the
time of day or further
information about the oven
mode when the timers are
in use.
CANCELLING
If operation is not completed, the oven
will beep periodically as a reminder to
set time. Push OFF to exit the TIMER
mode.
Selecting OFF when not in a setting
mode will stop oven function.
CLEAR TIMER 1 CLEAR TIMER 1 CLEAR TIMER 1 CLEAR TIMER 1 CLEAR TIMER 1
TIP
English • 17