Installation Instructions; Tools You Will Need - GE Profile GSMF2LEB Manual De Uso Y Cuidado

Installation
Instructions
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT
•
instructions for local inspector's use.
IMPORTANT
•
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
instructions for future reference.
• Skill level – Installation of this appliance
requires basic mechanical skills.
• Completion time –
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
If the refrigerator has already been installed,
remove the base grille (see Step 2 in
the Refrigerator ), then skip to Step 5 in
Installing the Refrigerator
— Save these
— Observe all
Keep these
Refrigerator Installation
30 minutes
Water Line Installation
30 minutes
Moving
.
Refrigerator
Models 21, 22, 23, 25, 26, 27 & 29
PREPARATION
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemaker, it will have
to be connected to a cold water line. A GE
water supply kit (containing tubing, shuto
valve, ttings and instructions) is available at
extra cost from your dealer, by visiting our
Website at GEAppliances.com
at geappliances.ca ) or from Parts and
Accessories, 800.626.2002 (in Canada
1.888.261.3055).

TOOLS YOU WILL NEED

" "
3/8 and 5/16 Socket
"
1/8 Hex Wrench
Phillips Head Screwdriver
66
(in Canada
" "
1/2 and 7/16 Wrench
Plastic Putty Knife