Mowing Head; Metal Cutting Attachment - Stihl FSA 90 Manual De Instrucciones

English
WARNING
￭ If components do not comply with safety requirements,
they will no longer function properly and safety devices
may be rendered inoperative. This can result in serious or
fatal injuries.
► Work only with an undamaged trimmer.
► If the trimmer is dirty: Clean the trimmer.
► Never attempt to modify your trimmer. Exception:
Mounting one of the combinations of cutting attachment
and deflector recommended in this instruction manual.
► If the controls do not function properly: Do not use your
trimmer.
► Only fit original STIHL accessories designed for this
trimmer.
► Mount the cutting attachment and deflector as
described in this instruction manual.
► Mount accessories as described in this instruction
manual or the instructions supplied with the accessory.
► Never insert objects in the trimmer's openings.
► If you have any queries: Contact your STIHL servicing
dealer for assistance.
4.6.2 Deflector
The deflector is in a safe condition if the following points are
observed:
– The deflector is not damaged.
– The line limiter blade is correctly installed.
WARNING
￭ If the product does not comply with safety requirements,
components will no longer function properly or safety
devices may be rendered inoperative. This can result in
serious injuries.
► Work only with an undamaged deflector.
► Work with a correctly installed line limiter blade.
46
► If you have any queries: Contact your STIHL servicing
dealer.
4.6.3

Mowing Head

The mowing head is in a safe condition if the following points
are observed:
– The mowing head is not damaged.
– The mowing head is not jammed.
– The mowing lines are properly installed.
WARNING
￭ If they are in an unsafe condition, parts of the mowing
head or mowing lines may come off and be thrown at high
speed. This can result in serious injuries.
► Work only with an undamaged mowing head.
► Never use metal elements in place of the nylon mowing
lines.
► If you have any queries: Contact your STIHL servicing
dealer for assistance.
4.6.4

Metal Cutting Attachment

The metal cutting attachment is in a safe condition if the
following points are observed:
– Metal cutting attachment and mounting hardware are
undamaged.
– Metal cutting attachment is not warped.
– Metal cutting attachment is properly mounted.
– Metal cutting attachment is correctly sharpened.
– Cutting edges of the metal cutting attachment have no
burrs.
4 Safety Precautions
0458-709-9821-B