22
USNG
YOUR
WASHING
MACHINE
USING YOUR WASHING
MACHINE
Basic
Operafion
Load the laundry
into the washing
machine
and close the door.
The Power button.
- The lights around
the cycle selector knob will illuminate
and a chime will sound.
Turn the cycle selector knob in either direction
to select the desired cycle.
- The proper default option is automatically
set according to the wash cycle. See page
23, Cycle Guide, for more detailed default options for each cycle.
- See page 24, Main Cycle, for details on the wash cycles.
- To change the options,
press the option
button and select the desired option. See
page 25, Setting options
before cycle, for more details on options.
- Skip to step 4 to use the default setting
without
changing the options.
Add the proper amount of detergent
and additions
(bleach, softener)
into the detergent
dispenser drawer.
- See page 20, Using detergent/fabric
softener, for more details on using detergent.
Pressthe Start/Pause
button.
- The washing
machine will start.
When the melody
plays, the wash cycle is finished.
- When the washing cycle is finished,
the door will unlock. Open the door and remove
the laundry immediately.
- Make sure to check around the door seal when taking out the finished
load. Small
items may be caught in the door seal.
_@ NOTE ........................................................................................................................................
, • The front-load
washing
machine rotates the laundry
in a way that allows it to use less water while still fully
r
saturating
your clothing.
It is normal to not be able to see water during the wash cycle.
i o If the temperature
or the water level inside the machine
is too high, the door locks and cannot be opened. To
,
open the door while washing,
use the Rinse + Spin feature.
\ .....