MA NTENANCE
33
Cleaning
fhe
drain
pump
filfer
The washing
machine fails to drain if the drain pump
filter is clogged.
Periodically
clean the drain filter to
prevent clogging
with foreign
objects.
1
Press the Power button to turn off the washing
machine
and pull out the plug.
2
Open the drain pump filter cover.
6 Recap the plug onto the drain hose and reattach the
drain hose.
7
Insert the drain pump filter.
3
Unclip the drain hose and remove the plug from the
drain hose to drain the remaining
water.
4
Twist the pump filter counterclockwise
to remove it.
5
Clean the pump filter and opening.
8
Close the drain pump filter cover.
-A WARNING
• Make sure to pull out the plug before cleaning.
Failure
to do so may cause electric
shock.
• Opening
the drain filter will result
in water
overflowing
if there is water
in the washer tub.
Make sure to check if the water
is completely
drained before opening the drain filter.
• If you use the washing
machine
with the drain
filter
reassembled
incorrectly
after cleaning
it,
or if you use the machine
without
the filter, it
may cause leaks or malfunction
of the washing
machine.
......................................................................................................................................................................................
J
,_@ NOTE
" L-_E message
will blink when the drain
pump
filter
is clogged
with dirt. Clean the drain pump
f ter.
._