32
MAINTENANCE
Cleaning
fhe
wafer
inlet
fillers
Clean the water inlet filters periodically
to prevent
clogging.
Take extra care to clean the water inlet filters
in areas using hard water. Water may not be supplied
if
there are foreign
objects, such as rust, sand, or stones
in the water inlet filters.
1 Press the Power button to turn off the washing
machine
and pull out the plug.
2
Turn off the faucets connected
with the water inlets.
3
Remove
the water
inlets.
Pull out the water inlet filter.
6
7
j®
_
®
i
Remove foreign objects from the water filter inlet.
- Soak the water filter inlets in white vinegar
or a
lime scale remover
or use a toothbrush
to remove
foreign objects and rinse thoroughly.
Press the water filter inlets back into place.
Reattach the water lines to the washing
machine.
-_ WARNING
Unplug the power
cord and turn off the faucets
before cleaning. Failure to do so may cause
electric
shock.
Do not use the washing
machine without the
inlet filters,
If you use the washing
machine
without
the inlet filters
it will cause leaks and
malfunction.
If you use the washing
machine
in an area with
hard water, the inlet filter may clog due to lime
buildup.
Contact
your
nearest LG customer
service center
if the inlet filter cannot be cleaned
or is missing.
\
: @ NOTE
I E message
will blink on the display
when the
water
pressure
in the detergent
drawer
is weak
or an inlet filter
is clogged
with
dirt. Clean the
\.
inlet filter.