Surtek CB632 Manual De Usuario Y Garantía página 10

inatention while operating power tools may
result in serious personal injury.
b)
Use safety equipment. Always wear
Safefy equipment such as
eye protection.
dust mask, non-skid safety shoes, hard hat
or hearing protection used for appropriale
conditions will reduce personal injuries.
c)
Avoid accidental starting. Make sure the
switch is in the off-position before plugging
Carrying power tools wíth your finger on
in.
the switch or plugging in power tools that
have the switch on invites accidents.
d)
Remove any adjusting key or wrench
before turning the power tool on.
or a key left attached to a rotating part of the
power tool may result in personal injury.
e)
Do not overreach. Keep proper footing
and balance at all times.
This enables better control of the power tool in
unexpected situations.
f)
Dress properly. Do not wear loose
clothing or jewelry. Keep your hair. clothing
and gloves away from moving parts.
clothes, jewelry or long hair can be caught in
moving parts.
g)
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
Use of these devices can reduce dust
used.
related hazards.
4) Power tool use and care
a)
Do not force the power tool. Use the
correct power tool for your application.
correct power tool will do the job better and
safer at the rate for which it was designed.
b)
Do not use the power tool if the switch
does not turn it on and off.
that cannot be controlled with the fire switch is
dangerous and must be repaired.
10
A wrench
Loose
5) Battery tool use and care
The
Any power tool
c)
Disconnect the plug from the power
source before makíng any adjustments,
changing accessories or storing power
Such preventive safety measures reduce
tools.
the risk of starting the power tool accidentally.
d)
Store unused power tools out of the
reach of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e)
Maintain power
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool operation.
If damaged, have the power tool repaired
Many accidents are caused by
before use.
poorly mantained power tools.
f)
Keep cutling tools sharp and clean.
Properly maintained culting tools with sharp
cutting edges are less likely for bind and are
easier to control.
g)
Use the power tool, accessories and
tool bits etc, in accordance with these
instructions and in the manner intended for
the particular type of power tool, taking
into account the working conditions and
the work to be performed.
tool for operations different from intended
could result in a hazardous situation.
a)
Ensure the switch is in the off position
before inserting battery pack.
battery pack into power tools that have the
switch on invites accidents.
b)
Recharge only with the charger specified
by the manufacturer.
suitable for one type of battery pack, may
create arisk of fire when used with another
battery pack.
tools. Check for
Use of the power
Inserting the
A charger that's