General Safety Instructions - Surtek CB632 Manual De Usuario Y Garantía

GENERAL SAFETY INSTRUCTIONS

KNOW YOUR POWER TOOL.
Read and understand the owner's manual and
labels attached to the tool, learn its applications
and limitations, as well as the specific potential
hazards of this tool.
WORK AREA:
Keep your work area clean and well iluminated,
loosen work benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which may ignite dust
or fumes.
Children and pets should be kept at a safe
distance from the work area.
Do not use this power tool, or charger in damp or
wet locations, or expose them to rain.
If working outdoors only use extension cords
designed for this purpose.
ELECTRICAL SAFETY:
Use the nailer only with the battery pack supplied,
By using different battery types may create a risk
of tool damage or fire.
Protect against electric shocks - avoid body
contact with grounded surfaces (e.g radiators,
pipes, dishwashers, refrigerators).
Hold the tool by insulated gripping surfaces.
Take extra precautions when operating where the
nailing tool may contain hidden wiring.
This product is supplied with a plug fitted. If it
needs replacing use a new plug and follow the
connecting instructions below.
The wires in the plug are coloured in the following way:
Blue Fuse
(Neutral) (3 Amp)
E
L
N
Brown
(Live)
Blue Neutral (N)
Brown Live (L)
Always secure wires
in the plug terminal
carefully. Secure the
cable in the cord
grip firmly.
E N G L I S H
NOTE
If your main wires differs from the above, consult
a qualified electrician. Always make sure the main
supply is of the correct voltage and the correct fuse
protection is used. In the event that the plug has to
be replaced, use a 3 amp fuse.
SERVICE
Tool service must be performed only by a qualified
technician, Service or maintenance performed
by unqualified personnel could result in a risk of
injury, as well as invalidating any warranty you
may have.
PERSONAL SAFETY
Avoid wearing loose clothing, jewellery or
anything that could get caught in moving parts or
cause electrostatic shock.
recommended.
Long hair should be tied back.
USE SAFETY GOGGLES
Wear CE approved safety goggles at all times.
Normal spectacles only have impact resistant
lenses, they are safety glasses. Face or dust
NOT
masks should be used if dust is produced or you
are working overhead.
Ear protection is advised particularly during
periods of extended operation. Avoid accidental
starting, Be sure the switch trigger is in the locked
or off position before inserting the battery pack.
Carrying tools with your finger on the switch, or
inserting the battery pack into a tool switched on
invites accidents.
Do not overreach. Keep proper footing and
balance at all times, proper footing and balance
enable better control of the tool in unexpected
situations.
Take extra precautions if using the nailer whilst
standing on a ladder/stairs.
STAY ALERT
Always be aware of your surroundings and use
common sense. Do not operate a power tool when
you are tired or under the influence of alcohol or
drugs.
DISCONNECT POWER TO THE TOOL
Remove the battery pack when not in use, before
U se r 's M a nua l
footwear is
NON-SLIP
3