Safety Instructions - Surtek CB632 Manual De Usuario Y Garantía

servicing and when changing accessories etc.
KEEP GUARDS AND SAFETY MECHANISMS IN
, and in working order.
PLACE
TOOL USE AND CARE
Use clamps or other practical ways to secure and
support the work piece to a stable platform or
work bench, whenever possible.
Do not force the tool.
Do not attempt to use the tool for a purpose for
which it was not designed, the tool will give much
better service if you do not use excessive force.
Disconnect the battery pack from the tool before
making any adjustments, changing accessories or
storing.
Disconnect the tool when not in use, or when
changing accessories etc.
Always remove the battery when leaving the tool
unattended. All tools should be kept out of reach
of children.
Do not expose the tool to rain and moisture.
When the battery pack is not in use, keep it away
from other metal objects, E.g. paper clips, coins,
keys, nails, screws, other batteries or other small
metal objects that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause sparks, battery meltdown,
leaks or fire.
Check for misalignment or binding of moving
parts, breakage and any other abnormal condition
that may affect the tool operation. If damaged,
have the tool serviced before use. Many accidents
are caused by poorly maintained tools.
Only use accessories that are recommended by
the manufacturer of your model. Accessories that
may be suitable for one tool, may create a rísk of
injury when used on another.
AVOID ACCIDENTAL STARTING
Make sure the switch is in the OFF position before
inserting the battery pack.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for the best and safest
performance. Follow instructions for lubricating
and changing accessories. All extension cords
must be checked at regular intervals and replaced
if damaged or weared out. Always keep the hand
grip on the tool clean, dry and free of oil and
grease or water.
4
SPECIFIC SAFETY INSTRUCTIONS
Do not place tools or their batteries near fire or
heat, they may cause explosion.
Do not charge the battery in a damp or wet
location.
The battery should be charged in a location where
the temperature is more than 10°C but less than
25°C.
Before using the battery charger, read all
instructions in this manual.
To prevent damage to the charger body and
cord, never use the power cord to disconnect the
charger from the main socket .
Make sure the cord is located so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
Do not operate the charger with a damaged
cord or plug, if damaged, have them replaced
immediately by a qualified technician.
Do not operate the charger if it has received
a sharp blow, been dropped or damaged in
any other way; have it checked/repaired by a
qualified technician.
Do not disassemble the charger. Take it to a
qualified technician for service or repair. Incorrect
reassembly may result in a risk of electric shock
or fire.
To reduce the risk of electric shock, unplug the
charger from the wall outlet before attempting any
maintenance or cleaning. Simply turning off the
controls will not reduce this risk.
READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE CHARGING THE BATTERY OR USING
THE NAILER.
1. Do not burn the battery pack even if it is
severely damaged or is completely depleted. The
battery pack can explode in a fire.
2. The battery supplied is sealed, however if the
battery is dropped or damaged a small leakage
of liquid from the battery pack cells may occur, if
the outer seal is broken and this leakage gets on
your skin; wash quickly with soap and water, and
seek medical attention immediately.
If battery liquid gets in your eyes, flush them
with clean water and seek immediate medical
attention. (Medical notes: the liquid is 25-35%