How To Use The Steam Station; Temperature Settings; Steam Settings - Bosch Sensixx B45L Instrucciones De Uso

"i-Temp" function
This steam station has a unique "i-Temp" function.
When switching on the appliance it automatically
sets an appropriate combination of temperature and
steam, which is suitable for all fabrics that can be
ironed.
The "i-Temp" function prevents clothes from being
damaged due to an unsuitable temperature being
selected.
The "i-Temp" function does not apply to fabrics
that cannot be ironed. Please check the garment
care label for details or try ironing on a part of the
cloth not visible normally.
"antiShine" function
This steam station has a unique "antiShine" function.
If this function is selected and the steam release
button (13-14*) is regularly pressed, the risk of shiny
marks on the garment due to the ironing is reduced.
How to use the
steam station
1.
When the steam station is plugged in and main
power button set to the "on" position (button
illuminated), the display (8) lights up and shows
all icons for 2 seconds.
2.
After that time, the appliance shifts automatically
to the "i-Temp" setting. The icon will flash until the
temperature and steam settings are reached.

3. Temperature settings:

Temperature level selection tactile icon
is used to change the temperature of the
iron soleplate.
Automatic temperature selection of the
iron soleplate. It is suitable for any type
of fabric which can be ironed.
Temperature setting for dark and delicate
fabrics. Reduces the risk of shiny marks.
Indicates that the selected ironing
temperature is suitable for silk and
synthetic fabrics.
Indicates that the selected ironing
temperature is suitable for wool.
Indicates that the selected ironing
temperature is suitable for cotton and
linen.
To change the temperature of the soleplate, touch
the icon on the display (8) repeatedly. The iron
runs through the following cycle:

4. Steam settings:

Steam level selection tactile icon is used
to change the amount of steam coming
out of the soleplate.
Low steam flow
Medium steam flow
High steam flow
When "i-Temp" and "antiShine" functions are
selected, it is not possible to change the steam
setting by pressing the
is automatically selected.
Only on settings it is possible to
change the steam amount.
To change the amount of steam manually, touch the
icon on the display (8) repeatedly. The steam
generator runs through the following cycle:
icon. The steam amount
BOS CH
17