Hilti RC 4/36-DAB Instrucciones De Uso página 20

▶ Avoid touching the contacts.
Battery charger use and care
▶ Use the charger only to charge the specified Hilti batteries.
➥ Do not attempt to recharge non-rechargeable batteries.
▶ Take care to ensure that the charger stands in a steady, secure position. A falling battery or charger can
endanger you and/or others.
▶ Maintain the appliance carefully. Check to ensure that no parts are broken or damaged in such a way
that the appliance may no longer function correctly. If parts are damaged, have the parts repaired before
using the appliance.
▶ Use chargers and the corresponding batteries in accordance with these instructions and as is specified
for this particular model. Use of chargers for applications different from those intended could result in
hazardous situations.
▶ Recharge the batteries only with the chargers specified by the manufacturer. A charger that is suitable
for a certain type of battery may present a risk of fire when used with other types of battery.
▶ When not in use, keep the battery and the charger away from paper clips, coins, keys, nails, screws
or other small metal objects that could cause a short circuit at the battery terminals or the charging
contacts. A short circuit between the battery terminals or charging contacts may cause injuries (burns)
and result in fire.
▶ Under abusive conditions, liquid may be ejected from the battery. Avoid contact with the liquid. If contact
accidentally occurs, flush with water. If the liquid contacts the eyes, also seek medical attention. Liquid
leaking from the battery may cause irritation or burns.
▶ Make sure that neither the charger nor the batteries suffer mechanical damage.
➥ Check the charger and battery for damage at regular intervals, especially to cable, plug and casing.
➥ Caution! Do not use a damaged charger and do not attempt to charge or continue to use damaged
batteries.
▶ When it is not in use, store the charger safely and out of reach of children.
▶ Batteries that have reached the end of their life must be disposed of safely and correctly to avoid
environmental pollution.
Service
▶ Have the appliance serviced by a qualified repair person using only genuine Hilti spare parts. The safety
of the appliance can thus be maintained.
▶ Check the condition of the supply cord at regular intervals. A defective supply cord must be replaced by
the manufacturer, the manufacturer's aftersales service, or a qualified specialist. Do not touch the supply
cord or extension cord if it is damaged while working. Disconnect the supply cord plug from the power
outlet. Damaged supply cords and extension cords present a risk of electric shock.
16 English
Printed: 18.09.2019 | Doc-Nr: PUB / 5296507 / 000 / 04
2142553
*2142553*