Switching The Appliance On / Off; Establishing A Bluetooth Connection - Hilti RC 4/36-DAB Instrucciones De Uso

5.3

Switching the appliance on / off

▶ Press the power button.
5.4

Establishing a Bluetooth connection

If you are prompted for a code, enter the code 0000.
1. Short-press the Bluetooth button.
2. To pair the appliance manually for the first time, press and hold down the Bluetooth button (for about 2
seconds) until the Bluetooth symbol starts to flash.
➥ Select the Hilti Radio Charger on the external device while the Bluetooth symbol on the display is
flashing.
➥ The devices have been successfully paired when the Bluetooth and pairing symbols both show
continuously in the display.
3. Press the Bluetooth button if the appliance is already paired.
➥ Pairing starts automatically and the pairing symbol on the screen starts to flash.
➥ The appliance searches for a signal for a maximum of 3 minutes.
➥ The pairing symbol appears in the display to indicate that the devices are paired.
➥ The Bluetooth symbol appears in the display to indicate that the appliance has found a paired external
device.
20 English
Printed: 18.09.2019 | Doc-Nr: PUB / 5296507 / 000 / 04
2142553
*2142553*