Every Month; Gearbox Oil Level Check; Every Year; Repair - Cobra PRO Instrucciones De Seguridad Y De Funcionamiento

COBRA PRO, TT, TT-AWD
Use only Atlas Copco IMPACT-OIL.

Every month

Gearbox oil level check

Before releasing the oil plug remove the six nuts for
the back cover. The level in the gearbox is checked
by unscrewing the oil plug. The oil level is correct
when it reaches to the bottom of the filling hole with
the machine standing upright. The volume of the
gearbox is 0.1 litre.

Every year

Overhauling should be done after 1 year of
continuous operation. Overhauling should for safety
reasons be performed by authorised personnel at an
authorised workshop.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0956 90a | 2010-01-01
Original instructions
Safety and operating instructions

Repair

Replacing the starter cord

Removing the old starter cord
1. Remove the starting mechanism.
2. Pull out about 40 cm (16 in.) of the cord.
3. Place the starter cord in the recess (A) in the
pulley.
4. Rotate the pulley until all tension is released.
5. Remove the lock ring and lift out the pulley
complete with spring and starter cord.
21