Avaya 6408 Manual Del Usuario página 5

Ocultar thumbs Ver también para 6408:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Your voice terminal
3ÅŠšÌ·kÌbŠÅ­‘@àÌXžšÎž‘ÌN×ÎΞšÅÌ@šbÌÅžxΐkàÅ
U€9h’
Uv€r…
8ƒh…x
Qhˆ†r
Sample feature option screen
3ÅŠšÌ·kÌX@‘‘Ì@­­k@Â@šXkËxk@Î×ÂkÌN×ÎΞšÅ
Call a
Call b
Call c
Program
AD entry
Sample labelled card
To install the designation card on your termi-
nal, unsnap the plastic cover and lift off.
• The four display control buttons are (from left to right):
- Menu for entering Softkey Mode and accessing the first feature option screen
- Exit for exiting the Softkey Mode and returning to Normal Mode
- Previous and Next for going back and forth through the feature option screens.
• The softkeys located below the display are used along with display control buttons to access
features. If a feature is active, an arrow appears above the feature abbreviation.
The display gives you call-related information for incoming calls. When the call is from a sys-
tem user, the display shows the caller's name and extension number. When the call is from
outside the system, the display shows the calling party's number.
In most cases 3 of these buttons are devoted to incoming and outgoing calls (call appear-
ances). The remaining buttons can also be call appearance buttons or they can access addi-
tional features (feature buttons). The features are administered on the call appearance/feature
buttons by your system manager.
Each of these buttons has a red light and a green status light.
Green status light
r‘‡Ã‡‚ÃhÃiˆ‡‡‚Ã
feature button
extension button
call appearance
The red light tells you this is the line you are using or this is the line you will get when you go
off–hook.
Off
Steadily on
Flashing
Off
Active
Idle
Busy
Idle
Busy
Incoming call
Slow Flash
Intermittent
Flash
Invalid
Held call
4

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

64166424

Tabla de contenido