Random Playback - Teac MC-DV250 Manual Del Usuario

DVD / VCD / CD
CD
64
Repeat Playback 2
Repeat Playback of a Designated Section
(A-B Repeat)
1 Start playback and designate the point at which the A-B
repeat should start (point A) by pressing the A-B button.
"A TO B SET A" appears on the screen and the "A" indicator
lights up in the front panel display.
2 When the point at which repeat playback should end
(point B) is reached, press the A-B button again.
"A TO B SET B" appears on the screen and the "A-B"
indicator lights up in the front panel display.
The designated section will be played repeatedly.
< When playing a CD/VCD, the point A and B should be
selected from the same track.
< The SCAN button (,) can be used to fast-forward to point
B after designating point A.
< There should be more than one second between A and B.
< To cancel the A-B Repeat, press the A-B button again.

Random Playback

Tracks of a disc will be played randomly.
Press the RANDOM button during playback of CD.
"Random" appears on the screen, and "RANDOM" indicator
lights on the front panel display.
< This function is only available for CD.
< If you press the / button during random playback, next
track will be randomly selected and played. A track cannot be
replayed during random playback.
< To stop random playback, press the RANDOM button.
< To cancel random playback and go back to normal play, press
the RANDOM button.
< If one of the following buttons is pressed, random mode will
be cancelled:
STOP, OPEN/CLOSE, STANDBY/ON, FUNCTION, AUX, TAPE,
FM/AM
ENGLISH