OHAUS Guardian 7000 Serie Manual De Instrucciones página 17

Guardian 7000 Series
5. Briefly press the right knob (D) to confirm the minutes
setting and begin changing the hours setting.
The minutes setting will stop blinking and the hours
setting will begin to blink to indicate that it can be
modified.
6. Rotate the right knob (D) to adjust the hours setting.
a) Clockwise rotation will increase the time.
b) Counterclockwise rotation will decrease the
time.
c) The hours setting will continue to blink to
indicate the new timer setting is not
confirmed.
d) If the timer setting (T) remains idle without
confirmation for 4 seconds, the timer will
remain at the current setting and the unit will
exit the timer setting control.
7. Briefly press the right knob (D) to confirm the hours
setting and exit the timer settings.
a) The hours setting will stop blinking.
b) The unit will be ready for normal use.
8. To clear the timer (T) to 00:00, press and hold the
right knob (D) to enter the timer setting, then press
and hold the right knob (D) again until the timer (T)
resets to 00:00.
a) This can only be performed while changing
the timer in the minutes or hours setting.
b) The unit will exit the timer setting control and
be ready for normal use.
EN-15