OHAUS Guardian 7000 Serie Manual De Instrucciones página 32

EN-30
9. Rotate the left knob (C) to the "BLE ID" setting.
10. Briefly press the left knob (C) to change the ID
number that the unit will broadcast to the OHAUS
SmartLink™ app.
11. Rotate the left knob (C) to change the ID number.
12. Briefly press the left knob (C) to confirm the
desired ID number.
13. Rotate the left knob (C) to the "BLE TOUT" setting.
The BLE time out setting can only be set in
HH:MM mode.
14. Briefly press the left knob (C) to change the time at
which the unit will shut off the heater and sound an
alarm (5 beeps).
This "Time Out" timer will begin to count
a)
down once the Bluetooth connection is lost.
b) The minute setting will begin to blink to
indicate that it can be modified.
15. Rotate the left knob (C) to the desired time.
a) The setting cannot be set higher than 4 hours
(04:00).
If the timer is set to 00:00 ("OFF"), the heater
b)
will turn off as soon as Bluetooth connection
is lost.
16. Briefly press the left knob to confirm the desired
minute setting and to change the hour setting.
The hour setting will begin to blink to indicate that
it can be modified.
17. Rotate the left knob (C) to the desired time.
Guardian 7000 Series