OHAUS Guardian 7000 Serie Manual De Instrucciones página 25

Guardian 7000 Series
10. Rotate the left knob (C) to the desired program.
11. Briefly press the left knob (C) to select the program
to clear.
12. To confirm the program to clear, rotate the left
knob (C) to the "YES" option.
13. Briefly press the left knob (C) to clear the selected
program.
14. After a program is loaded, rotate the left knob (C)
to the "RUN" setting.
15. Briefly press the left knob (C) to enter the RUN
settings.
16. Rotate the left knob (C) to the desired program.
17. The unit will display each step to the highlighted
program if idle for more than 2 seconds.
The unit will first display the step number, then it
will display the time, temperature, speed, and timer
start settings. Then the unit will proceed to display
the next step.
18. To run the program, press and hold the left knob
(C) until the unit beeps.
a) While the unit is running a program the
program icon (U) will be illuminated next to
the timer (T).
EN-23