OHAUS Guardian 7000 Serie Manual De Instrucciones página 30

EN-28
18. Rotate the left knob (C) to the desired time.
19. Briefly press the left knob (C) to confirm the
desired hour setting.
20. Rotate the left knob (C) to the "BACK" icon.
21. Briefly press the left knob (C) to return to the top
level of the settings menu.
22. Rotate the left knob (C) to scroll to the 'EXIT' icon.
23. Briefly press the left knob (C) to return to the main
operating screen.
Notice the SmartPresence™ icon (V) is
illuminated.
Once the SmartPresence™ feature is turned on
The SmartPresence™ icon (V) will be illuminated on the main operating screen.
1.
If the heater is running and the unit does not detect the user for the time set in the "WARN" setting:
2.
a) The unit will beep 5 times.
The SmartPresence™ icon (V) will begin blinking.
b)
To reset the SmartPresence™ warning timer:
A.
a) Create movement in front of the unit.
b) Or rotate / press either the left (C) or the right (D) knob.
If the unit does not detect the user for the time set in the "TOUT" (Time Out) setting:
3.
a) The heater will shut off.
b) The unit will beep 5 times.
The SmartPresence™ icon (V) will continue blinking to indicate that the heater was turned off by the
c)
SmartPresence™ feature.
d) If the unit is stirring, the stirrer will remain on and the timer (T) will continue to count.
e) If the unit is heating only, the timer (T) will reset to 00:00 or the previous countdown timer setting.
4. To restart the heater, press and hold the left knob (C) until the heater indicator (N) illuminates.
The SmartPresence™ timers will also restart.
a)
Guardian 7000 Series