OHAUS Guardian 7000 Serie Manual De Instrucciones página 33

Guardian 7000 Series
18. Briefly press the left knob (C) to confirm the
desired hour setting.
19. Rotate the left knob (C) to the "BLE CONN"
setting.
20. Briefly press the left knob (C).
a) This will start broadcasting the Bluetooth
signal from the unit.
b) If the Ohaus Wireless Dongle is not
connected to the unit's USB port (F), then the
unit will display an error message ("ERR")
during Bluetooth connection.
21. Open the OHAUS SmartLink™ app on the
smartphone.
The app will automatically scan for nearby
Bluetooth signals from Guardian 7000 units.
22. Briefly press the Guardian 7000 icon with the
same ID as chosen in steps 9-12 to connect the
app to the unit.
a) The unit will beep once when the initial
connection is made.
b) The box next to the selected Guardian 7000
icon will be checked.
c) The heater will now be functional until the app
is disconnected from the unit or the
SmartLink™ feature is turned off.
23. To disconnect the OHAUS SmartLink™ app from
the unit, briefly press on the Guardian 7000 icon
with the same ID.
24. Rotate the left knob (C) to the "BACK" icon.
25. Briefly press the left knob (C) to return to the top
level of the settings menu.
26. Rotate the left knob (C) to scroll to 'EXIT'.
EN-31