Operating The Intellibrite ® Led Light Using A Wall Switch; Intellibrite Underwater Spa Led Color-Changing Light; Intellibrite Spa Led Light Models; Using An External Isolating Safetytransformer For Intellibrite - Pentair Water LED IntelliBrite Guía De Instalación Y Del Usuario

®
IntelliBrite Underwater Spa LED Color-Changing Light
®
The IntelliBrite underwater spa LED (light-emitting diode) light system gives you brilliant vivid multi-colors with spectacular
effects for your pool. The energy efficient colored LED array can cycle through colors at varying speeds and in different
sequences of color. The unique IntelliBrite
providing increased light intensity. Choose one of the seven pre-programmed color light shows or select one of the five
fixed colors to create virtually endless range of dramatic underwater lighting effects.
®
IntelliBrite LED lights are fully compatible with Pentair IntelliTouch
information about using IntelliBrite
User's Guide (P/N 520102) and the EasyTouch
®
IntelliBrite Spa LED Light models
The two models of IntelliBrite
®
IntelliBrite Spa LED Light, 120 VAC, with integrated 12 VAC transformer, 50 ft. cord length* (P/N 640051)
IntelliBrite ® Spa LED Light, 12 VAC, (requires a 12 VAC 60 Hz [50 Hz where applicable] isolating safety transformer),
50 ft. cord length* (P/N 640054) — (*) cord lengths vary from 30 ft. to 100 ft.

Using an External Isolating SafetyTransformer for IntelliBrite

For information about using multiple 12 VAC IntelliBrite
Operating the IntelliBrite
®
IntelliBrite LED lights can be controlled using a standard wall-mount light switch. Multiple IntelliBrite
be connected via a junction box to a single switch so that all lights can be switched on and off together. IntelliBrite
lights are controlled by cycling AC power from a standard wall switch. By turning the switch on and off a specific number
of times, the light activates one of the seven light show modes, fixed colors, and enables the "Hold" and "Recall" feature.

Selecting a light show mode or fixed color

Switch power on to the light. A white light will momentarily illuminate, followed by the previously selected color. To select
a color show mode (1-7) or fixed color (8-12), turn the wall switch off/on a specific number of times. Each number (1-12)
shown below corresponds to the number of times to power-cycle the switch to activate a color light show or fixed color.
For details about saving color effects while in "show" modes, see "Hold" and "Recall" feature on page 2.
1. SAm ® Mode: Cycles through white, magenta, blue and green colors (emulates the Pentair SAm
2. Party Mode: Rapid color changing building energy and excitement.
3. Romance Mode: Slow color transitions creating a mesmerizing and calming effect.
4. Caribbean Mode: Transitions between a variety of blues and greens.
5. American Mode: Patriotic red, white and blue transition.
6. California Sunset Mode: Dramatic transitions of orange, red and magenta tones.
7. Royal Mode: Richer, deeper color tones.
8. Blue: Fixed color.
9. Green: Fixed color.
10. Red: Fixed color.
11. White: Fixed color.
12. Magenta: Fixed color.
13. Hold: Save the current color effect during a color light show.
14. Recall: Activate the last saved color effect.
Example: To select California Sunset Mode; turn the switch off and on six successive times.
Turn
switch
▼ Off/On
six times
WARNING During the off/on switching process, before the selected color is displayed, no illumination will
occur. This operating mode is normal during the switching process. During this period the pool and spa will be dark
and precautions should be taken to avoid unforeseen accidents. Failure to observe this warning may result in
serious injury or death to pool and spa users.
®
lens geometry provides a wider beam for greater underwater light reflection
®
lights with IntelliTouch
®
User's Guide (P/N 520584).
® Spa LED light are:
®
®
LED lights using a wall switch
During the off/on switching process, no
illumination will occur, then a white
light will momentarily illuminate.
®
and EasyTouch
® ®
and EasyTouch automation systems, refer to the IntelliTouch
®

12 VAC Lights

lights on an external isolating safety transformer, see page 9.
®
automation system. For more
®
LED lights can
® light).
Followed by the
selected
"California
Sunset Mode"
1
®
®
LED