Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2
Operating IntelliBrite
Saving a color mode or fixed color
When power is switched off to the IntelliBrite
the light is powered on, the previously saved color show mode or fixed color will be displayed. For example, while in "Party
Mode" switch the light off. Wait more than 10 seconds, switch the light back on to resume "Party Mode."
Hold and Recall feature
Hold: Use the Hold feature (power-cycle 13 times) to capture and save a color effect while displaying one of the light
show modes. It's easier to capture custom color effects from one of the slower light show modes, such as "Romance
Mode" (#3).
Capture a unique color effect
while "Romance Mode" is active.
Recall: Use the Recall feature to activate the last saved color effect (using the Hold feature) while in color show mode or
fixed colors. To recall the color effect, power-cycle 14 times, and after five seconds the last saved color effect will be displayed.
While the light is on in color
show or fixed mode.
Powering on the light
When the IntelliBrite LED light is powered on, a momentarily white light will illuminate, followed by the previously selected color.
Note: If power to the light is off for more than five seconds, the last color show mode or fixed color that was saved will
be displayed.
Troubleshooting
Use the following tips to help to resolve problems that might occur while operating the LED light.
P
o r
b
T
h
e
g i l
L
g i
t h
Instead of using a wall switch, the IntelliBrite
The IntelliBrite
®
Controller [P/N 600054] provides complete control of Pentair Water Pool and Spa
(light-emitting diode) lights, and IntelliBrite LED landscape lights. It's easy to select a lighting feature, just dial in any one of the
pre-programmed color light shows or fixed colors. Using the Hold and Recall buttons you can also create endless unique lighting
effects.
®
The IntelliBrite
Controller can control individual or multiple IntelliBrite
connected via a junction box to an IntelliBrite
Maximum wattage when using multiple lights with IntelliBrite
When using multiple IntelliBrite
following example combination of IntelliBrite
®
• Two (2) IntelliBrite
LED pool lights (each light 70 Watt maximum)
• One (1) IntelliBrite
®
LED spa light (each light 40 Watt maximum)
• Eight (8) IntelliBrite LED landscape lights (each light 15 Watt maximum)
®
LED Lights using a wall switch
®
lights, the last color show mode or fixed color will be saved. The next time
Turn switch off/on 13 times to
save color effect.
Turn switch off/on 14 times to
activate last save color effect.
e l
m
C
t h
w
l l i
n
o
i t
u l l
m
n i
t a
. e
C
d
o
e
s
n
t o
u f
n
t c
o i
n
p
o r
p
r e
. y l
C
a
B
®
LED spa light can be used with an IntelliBrite
®
Controller so that all lights can be switched on and off together.
®
LED lights, the total allowable light wattage is 300 Watts maximum. The
®
LED lights can be connected to the IntelliBrite
On
▼
Off
On
▼
Off
a
u
s
e
A /
t c
o i
n
h
e
k c
h t
e
g
o r
u
n
d
a f
u
t l
w
r i
n i
g
a
n
d
h
e
k c
h t
e
g i l
t h
w
r i
n i
g
c
o
n
n
e
t c
o i
n
n
d
o t
h t
e
A
C
p
o
w
r e
s
w
c t i
. h
e
s
u
e r
h t
t a
h t
e
e r
s i
p
o r
p
r e
A
C
p
o
®
LED lights. Multiple IntelliBrite
®
Controller
(Continued)
Saved color effect
is displayed.
Saved color effect
is displayed.
e r
s
t e
f i
n
e
c
e
s s
a
. y r
o t
h t
e
u j
n
t c
o i
n
b
x o
t a
h t
e
p
o
o
s l
d i
w
r e
a
p
p
e i l
d
o t
h t
e
g i l
h
. t
®
Controller
®
IntelliBrite
®
Controller:
®
IntelliBrite
Controller
[P/N 600054]
e
(sold separately)
®
underwater LED
®
LED lights can be
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
