Activating / Deactivating The Power-Saving Mode; Activating / Deactivating The Standby Mode - DURAVIT 610000 Manual De Instrucciones

Activating / deactivating the power-saving mode

> Press the "POWER" button <
You will hear a confirmation tone.
SensoWash Starck enters the power-saving mode.
®
The indicator lamp is green.
> Press the "POWER" button <
unit.
You will hear a confirmation tone.
The SensoWash
The indicator lamp is red.
The seat heating function is not active during the power-saving mode.
The seat temperature setting remains at the lowest level if the seat temperature was
set previously.

Activating / deactivating the standby mode

> Press the "POWER" button <
3 seconds).
You will hear a confirmation tone.
SensoWash Starck enters the standby mode.
®
> Press the "POWER" button <
(more than 3 seconds).
You will hear a confirmation tone.
The SensoWash
The indicator lamp is red.
The spray wand moves out briefly and then back again.
56
6
6
Starck returns to the normal mode.
®
6
6
Starck returns to the normal mode.
®
> briefly (less than 2 seconds) on the seat unit.
> briefly (less than 2 seconds) again on the seat
> on the seat unit for a longer period (more than
> on the seat unit once again for a longer period