DURAVIT 610000 Manual De Instrucciones página 64

There is no water
spray coming out of
the spray wand.
Heatable seat
Problem
The seat is not
warm enough.
The seat tempera-
ture is too high.
64
There is no contact between
the human body and the
seat sensor.
The hose is pinched or
kinked.
The opening of the spray
wand is blocked/soiled.
Potential cause
The seat temperature has
been set to "Off" or "Low".
The seat temperature has
been set to "High".
> Make sure that the human
body touches the seat sensor
and then carry out the func-
tion once again.
> Check the hose.
> Use a small brush in order to
clean the opening of the spray
wand.
Solution
> On the remote control, set the
seat temperature to "Me-
dium" or "High".
> On the remote control, set the
seat temperature to "Me-
dium" or "Low".